Drain Line Cleaning-Switch Replacement

Drain Line Cleaning!

Purpose:

The drain line in an HVAC system is responsible for removing condensed water that forms during the cooling process. Regular cleaning prevents clogs that could cause damage to the system and promotes efficient drainage.

Cleaning process:

We use methods such as suction vacuums, special brushes, or chemical solutions to remove algae buildup, mold, sediment, and other debris in the drain line.

Check Water Flow:

After cleaning, we make sure that water flows freely through the drain line.

Restore Power:

Once cleaning and verification is completed, the power supply is reconnected to the system.

Frequency:

Drain line cleaning should be done regularly, as debris buildup can clog the flow of water, causing overflows and system damage. You can leave this service planned with us, this way we will be attentive to carry it out periodically.

Mold and Bacteria Prevention:

Keeping the drain line clean is essential to prevent the formation of mold and bacteria that could affect indoor air quality.

We understand the urgency of emergency situations. We are available 24 hours a day to address any problem with your air conditioning or heating system!

Switch Replacement!

Types of Switches:

In your HVAC system, there may be several types of switches, such as temperature limit switch, pressure switch, float switch (for drainage systems). The first thing is that we identify their status.

Purpose:

The switches in an HVAC system control and protect different components. For example, a temperature limit switch prevents the system from overheating.

Reasons for Replacement:

Switches can wear, corrode or fail over time due to exposure to environmental conditions and constant use. A replacement may be necessary if the switch does not function properly.

Shut down the System:

Disconnection of electrical power to the HVAC system. This is essential to ensure safety during the replacement process.

Identify the Faulty Switch:

We locate the faulty switch.

Remove the Old Switch:

We disconnect, disassemble and remove the faulty switch.

Install the New Switch:

We install the new switch. We connect the cables according to the labels or notes made previously. We make new labels.

Verify Connection:

We ensure that all cables are firmly connected to the new switch.

Restore Power:

Power is reconnected to the system. We perform system testing to ensure that the new switch works correctly for you.

Remember that, especially in the case of replacing switches, the essential thing is to have a professional service trained to carry out these electrical works. Ensure a safe and effective installation now!